Hard-Keys; Soft-Keys; Customer Programmable Features - Uconnect® System Settings - Dodge 2014 SRT Viper Owner's Manual

Hard-Keys

Hard-Keys are located below the Uconnect® system in
the center of the instrument panel. In addition, there is a
Scroll/Enter control knob located on the right side of the
Climate Controls in the center of the instrument panel.
Turn the control knob to scroll through menus and
change settings (i.e., 30, 60, 90), press the center of the
control knob one or more times to select or change a
setting (i.e., ON, OFF).

Soft-Keys

Soft-Keys are accessible on the Uconnect® display.
Customer Programmable Features — Uconnect®
System Settings
Press the Apps soft-key, then press the Settings soft-key
to display the menu setting screen. In this mode the
Uconnect® system allows you to access programmable
features that may be equipped such as Display, Clock,
UNDERSTANDING YOUR INSTRUMENT PANEL 167
Safety/Assistance, Lights, Doors & Locks, Auto-On
Comfort, Engine Off Operation, Compass Settings, Au-
dio, Phone/Bluetooth® and SiriusXM Setup.
NOTE: Only one touchscreen area may be selected at a
time.
When making a selection, press the soft-key to enter the
desired mode. Once in the desired mode press and
release the preferred setting until a check-mark appears
next to the setting, showing that setting has been se-
lected.
Once the setting is complete press the Back Arrow
soft-key to return to the previous menu or press the X
soft-key to close out of the settings screen. Pressing the
Up or Down Arrow soft-keys on the right side of the
screen will allow you to toggle up or down through the
available settings.
4