Wolf E Series Quick Start Manual

E Series Oven Quick Start Guide

Oven Operation

For complete information on the operation and maintenance
of your Wolf product, refer to the use & care guide.
CAUTION
Do not place cookware on the oven floor or use
aluminum foil or other material to line the oven floor or
side walls. Failure to adhere to this notice will damage
the porcelain interior and will void your warranty.
PRIOR TO USE
To ensure all residual oil from the manufacturing process has
been removed, each oven must go through the following
procedure.
Clean oven thoroughly with hot water and a mild deter-
1
gent. Rinse and dry with a soft cloth.
Turn on ventilation. Some smoke and odor is normal.
2
Touch ROAST (ROAST for lower oven) and set tem-
3
perature to 550°F for one hour.
Touch OFF and allow oven to cool with the door closed.
4
EXTENDED OPTIONS
To enter extended options mode, touch and hold SET
1
CLOCK for 5 seconds.
Touch ENTER to scroll through options, then follow
2
instructions on the control panel display.
To exit, touch CLEAR.
3
SETTING CLOCK
Touch SET CLOCK on the control panel.
1
Touch number pads to set time of day.
2
Touch ENTER, then touch 1 for AM or 2 for PM.
3
Touch ENTER.
4
SETTING TIMER
Touch SET TIMER on the control panel.
1
Touch number pads to set time in hours and minutes.
2
Touch ENTER.
3
Oven will chime and time will flash when complete. Timer
4
will continue to chime until CLEAR is touched.
SETTING OVEN CONTROLS
Touch desired cooking mode on the control panel. For
1
double ovens, touch UPPER/LOWER to select oven.
Touch ENTER to select preset temperature or use number
2
pads to change temperature.
Touch ENTER.
3
SETTING CONTROLS FOR PROOF
Touch PROOF.
1
Oven temperature is preset to 85°F. Touch ENTER to
2
select preset temperature or use number pads to change
temperature up to 110°F.
Touch ENTER.
3
SETTING CONTROLS FOR TEMPERATURE PROBE
Touch desired cooking mode.
1
Touch ENTER to select preset temperature or use number
2
pads to change temperature, then touch ENTER.
Insert probe into the thickest area of food. When making
3
bread, cook for approximately 10 minutes before inserting
probe.
When preheat is complete, use a pot holder to lift probe
4
receptacle cover, then insert probe.
Touch TEMP PROBE. Use number pads to select tem-
5
perature, then touch ENTER. Probe temperature appears
in the display until set point is reached.
An audible chime indicates internal temperature has
6
reached probe set point. Remove, then reinsert probe to
verify internal temperature.
SETTING CONTROLS FOR SELF-CLEAN
For 3-hour self-clean:
Touch CLEAN.
1
Touch ENTER.
2
For 4-hour self-clean:
Touch CLEAN.
1
Touch TIMED COOK.
2
Use number pads to increase stop time by 1 hour.
3
Touch ENTER twice.
4