Diagramas Eléctricos; Troubleshooting; Electrical Diagrams - Whirlpool LWF5050 Instructions Manual, Installation And Use Manual

Troubleshooting

Before calling to Service, prove the solutions here suggested.
Problem
Nothing works
Burners do not work
Burner flames are uneven,
yellow and / or noisy
The burner makes popping
The spark plug does not
trigger
Excessive heat around
cookware on cooktop
The oven does not work or
does not light
The oven burner flames
are uneven, yellow and / or
noisy
The oven temperature is
too high or too low
Diagramas Eléctricos/ Wiring diagrams
Modelos/ Models: LWF5050, LWF5150, LWF5350, & LWF6050.
Interruptor
de Luz de
Horno./
Oven light
switch.
Foco de Horno
40 W.
Oven bulb 40 W.
Modelos/ Models: LWF5550, LWF6550, LWF7650.
Interruptor de Luz
de Horno en
puerta./ Oven light
switch in oven
door.
Foco de Horno
40 W./ Oven bulb
40W.
12-Apr-2013 19:18:08 EDT | RELEASED
Check over
If wiring is properly connected and polarized energy supply
Has blown a fuse in the house or tripped circuit breaker
If there is gas in your home, check if other gas appliances that use
work
If the stove is properly connected to the gas supply
If there is gas in your home, check if other gas appliances that use
work
If clogged burner orifice
If you are properly positioned the burner caps
Type of gas being used at home (LP Gas).
That is not the burner wet or cap.
The heater is connected to a power source
There sparking and will not turn
The size of the cooking utensil
Cooking time and temperature selected
Type of gas being used at home (LP Gas).
The heater is connected to a power source
The activation of the knob
Type of gas being used at home (LP Gas).
The calibration setting oven temperature
Interruptor de
Encendido./
Electronic
ignition switch
Módulo de Encendido. /
Ignition module.
14 W.
Interruptor Luz de
Interruptor de
Horno./ Oven light
Encendido./ Electronic
switch.
ignition switch
In some European factories the letter "W" of the part code mentioned herein will be automatically
Solution
Connect to a properly grounded
Replace fuse or reconnect the circuit
Call your gas supplier
See the operating instructions or contact an expert.
Call your gas supplier
Remove the burners and See the operating instructions
of burners.
Check burner operation section.
If not using LP gas, the conversion must be made,
contact an authorized service technician.
Let it dry
Connect to properly grounded power
Call an authorized service
Check the location and size of pan.
See recipe and preheat schedule.
If not using LP gas, the conversion must be made,
contact an authorized service technician.
Connect to a properly grounded
See the operation section of oven
If not using LP gas, the conversion must be made,
contact an authorized service technician.
See the section "Adjust oven burner flame."
Módulo de Encendido/
Ignition module.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
25
26