Trouble Shooting; Customer Service - One for All SV-1710 User Manual

Problem & Solution
If your house has a heavy metal construction or is equipped with a
PC network, it can disturb the radio signal. Even moving the units a
few inches can improve the performance. If this doesn't work try
to move the TRANSMITTER and RECEIVER to another place in the
house. If you experience problems, try placing the units away from
electrical appliances.
• No picture on second TV.
- Make sure that the TRANSMITTER and RECEIVER are switched ON.
- Select "EXT" or "AV" on second TV.
- Make sure that all cables are connected correctly.
- Make sure that the video source (satellite receiver, video recorder,
camcorder, DVD player, digital or analogue Set-Top Box or Pay-TV
decoder box) is switched on.
- Make sure to use the correct SCART connector of the video source (check
manual of video source. Example: EXT1 or EXT2).
• Bad picture/ sound quality on second TV.
- Try to find out if the way the cables are placed cause interference.
- Make sure that the distance between the TRANSMITTER and RECEIVER
unit is less than 100 ft (30 m).
• Picture of selected TV channel disappears (snow-picture).
- Disable the auto standby mode of the VCR. (check the manual of the VCR
how to do this).
• The picture on your second TV is not correct.
- Select "EXT" or "AV" on second TV.
- Make sure that the video source is switched on.
• Using a remote control, you cannot control the video source from
your second TV.
- Aim the remote control directly at the RECEIVER unit and ensure that
there are no obstacles in between.
- Ensure that there is no other wireless device (wireless headphones,
speakers, RF control signals) interfering with the remote control.
- Make sure that TRANSMITTER and RECEIVER are more than 16 ft (5 m)
apart.
- Make sure to use the remote control of the video source.
- Reposition the IR Eye on the video source OR place the IR Eye 2 - 4 inch
(5 - 10 cm) in front of the video source.
• Buzzing sound when using the remote control
- With some types of TV you will not be able to solve this problem.
• S-VHS video shows no colour pictures (only black and white).
- Select CVBS video output format for your S-VHS VCR
• DVD player gives no pictures on either main- or second TV.
- Select CVBS video output format for your DVD player (check the DVD
player's user manual.
Please read the instruction manual carefully. If you still experience
problems operating the Wireless Audio Video Sender (SV-1710) you may
contact us at:
- ofahelp@uebv.com (Just send blank message, you will get auto-reply)
- www.oneforall.com
8

Trouble Shooting

Customer Service

WWW.ONEFORALL.COM