Getting Started - One for All SV-1710 User Manual

Getting Started

Now that both units are connected you can switch ON the units using the
ON/OFF switch. The red LED on the front should light up. Place the units as
high as possible to avoid interference of any kind.
OFF ON
TRANSMITTER
RECEIVER
ON
ON
The following paragraphs contain a few examples.
EXAMPLE 1:
Play video on the VCR (source) in the living room and watch the
picture on the TV (destination) in the bedroom.
Connect the TRANSMITTER to the VCR and the RECEIVER to the TV in the
bedroom. Switch on the video and insert a tape. Place the TRANSMITTER
on top of the VCR (aligned; see A) OR the IR eye on / in front of the IR
receiver of the VCR (see B). Switch on the TV in the bedroom. Select the
mode on the TV for "Line In" (AV, EXT or channel 0). Aim the VCR remote
control (or a universal remote control) to the RECEIVER unit and press play.
The video should start playing and picture and sound should appear on
your bedroom TV screen.
EXAMPLE 2:
If you do not have coax cable connection with the TV in the
bedroom you can tune in the channels on your VCR (source) in the
living room and watch the picture on the TV (destination) in the
bedroom.
You may need the manual of your VCR to tune in the TV channels.
Once all channels are tuned in, you are able to watch your TV channels
through your AV channel. Connect the TRANSMITTER to the VCR and the
RECEIVER to the TV in the bedroom. Switch on the video. Place the
TRANSMITTER on top of the VCR (see A) OR the IR eye on / in front of the
IR receiver of the VCR (see B). Switch on the TV in the bedroom. Select the
mode on the TV for "Line In" (AV, EXT or channel 0). You can take the
remote of your VCR (or a ONE FOR ALL universal remote) to your bedroom
to control your TV channels tuned in your VCR.
EXAMPLE 3:
Also, if you do not have coax cable connection with the TV in the
bedroom, the AV Sender gives the possibility to view your Satellite
Receiver (source) programs also on the TV (destination) in the
bedroom.
You probably already tuned in the channels on your Satellite Receiver. If
not, you may need the manual of your Satellite Receiver to tune in the TV
channels. Once all channels are tuned in, you are able to watch your TV
channels through your AV channel (or other output channel). Connect the
TRANSMITTER to the Satellite Receiver and the RECEIVER to the TV in the
bedroom. Switch on the Satellite Receiver. Place the TRANSMITTER on top of
the Satellite Receiver (see A) OR the IR eye on / in front of the IR receiver of
the Satellite Receiver (see B). Switch on the TV in the bedroom. Select the
mode on the TV for "Line In" (AV, EXT or channel 0). You can take the
remote of your Satellite Receiver (or a ONE FOR ALL universal remote) to
your bedroom to control your TV channels tuned in your Satellite Receiver.
7
WWW.ONEFORALL.COM