Flymo Hover Vac Operating Instructions Manual
Hide thumbs
Also See for Hover Vac:
- Original instructions manual (10 pages) ,
- Important information manual (12 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Flymo Hover Vac
Summary of Contents for Flymo Hover Vac
- Page 1 Hover Vac ® Mow n Vac 28 Original Instructions Hover Vac Mow n Vac 28...
-
Page 2: Carton Contents
IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK... - Page 3 5. If in doubt consult your local Service Repairer or quali- CONNECTORS - IMPORTANT fied electrician before the machine is used. • Flymo connectors are suitable for use with 2 core 6. A 13 Amp fuse must be fitted to the Mains Plug. cable only. Under no circumstances should these 7.
-
Page 4: Starting And Stopping
Assembly Instructions Assembly of lower handle to hood (A) 1. Place the ends of the lower handle into the slots 2. Secure lower handle to hood by firmly pushing fixing pin through holes in hood and handle (A1). 3. Repeat on the other side. •... -
Page 5: Adjusting The Cutting Height
Adjusting the Cutting Height HIGHEST This symbol visible • THERE ARE 2 CUTTING HEIGHTS (J & K) • Height of cut is adjusted by turning over the cutting head. LOWEST This symbol visible • Disconnect from the mains electricity supply and wait until the cutting head has stopped rotating. -
Page 6: Cutting System Maintenance
3. Plastic cutters should be straight. Replace if bent or hood twisted. Replacing Plastic cutters (S) • Use only genuine Flymo replacement plastic cutters specified for this product. These are available from all Husqvarna UK Ltd. Service Centres and major re- tail outlets. -
Page 7: Service Recommendations
A network of specialist dealers can be found in your local UK Ltd. stockists. Yellow Pages. To obtain service on your Flymo product sim- 4. Your product is uniquely identified by a silver and black ply telephone or visit your local Service Centre. Should you... -
Page 8: Replacement Parts
Replacement Parts Plastic Cutters Reference no.: FLY014 Part no.: 513846990 Environmental Information Husqvarna UK Ltd. products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life. •... -
Page 9: Ec Declaration Of Conformity
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Copyright © 2011 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks of Flymo S.A.