Chapter 2. Installation Guide; Hardware Installation; Software Installation; Overview - TP-Link TL-WN322G User Manual

Wireless g usb adapter

Hide thumbs Also See for TL-WN322G:

Table of Contents

Chapter 2. Installation Guide

There are two ways to install the Adapter:

1. Plug the Adapter directly to the USB port on your computer.

2. Connect the Adapter and your computer through the USB cable attached in package.

The promoted Found New Hardware Wizard screen will pop up when the adapter is installed

correctly.

The Adapter's Setup Wizard will guide you through the Installation procedure for Windows XP.

The Setup Wizard will install the TP-LINK Wireless Client Utility (TWCU) and drivers.

When you install the hardware prior to before installing the software, the system will prompt

"Found New Hardware Wizard", click Cancel, and run the Setup Wizard program on the

CD-ROM.

The Setup steps for Windows 2000 and XP are similar with each other. This user guide takes

Windows XP for example.

Insert the Resource CD into your CD-ROM drive, and the screen as shown below will

display. To continue, select TL-WN322G. There will be a menu including Install Driver &

Utility and User Guide.

This Manual: http://www.manuallib.com/file/2601900

TL-WN322G

Wireless G USB Adapter

Table of Contents