4.
After that, you should choose a Setup type. It is recommended that you select Install
Client Utilities and Driver. Select Install Driver Only to install driver only, select Make
Driver Installation Diskette(s) to make the diskette(s) as the installation driver (shown in
Figure 2-4). Click Next to continue.
5.
Click Browse to change the destination location for the software, then click Next in the
screen below (shown in Figure 2-5).
This Manual: http://www.manuallib.com/file/2601900
TL-WN322G
Figure 2-3
Figure 2-4
6
Wireless G USB Adapter