Toshiba Satellite U500 User Manual page 195

Supported Frequency Sub-bands
Subject to the radio regulations that apply in the countries/regions, your Wireless
LAN card may support a different set of 2.4 GHz channels. Consult your
Authorized Wireless LAN or TOSHIBA Sales office for information about the radio
regulations that apply in the countries/regions.
Wi rel ess I E E E 8 0 2 . 11 C h a n n e l s S e t s ( R e v i s i o n B ,
G an d d ra f t N )
Frequency Range
Channel ID
1
2
3
4
5
6
7
8
9
10
11
12
13
Refer to the sheet Approved Countries/Regions for use for the countries/regions
*1
that in which these channels can be used.
When installing Wireless LAN cards, the channel configuration is managed as
follows:
n For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless
LAN card will automatically start operation at the channel identified by the
Wireless LAN Access Point. When roaming between different access points
the station can dynamically switch to another channel if required.
n In a Wireless LAN Access Point, the Wireless LAN card will use the factory-
set default channel (printed in bold), unless the LAN Administrator selected a
different channel when configuring the Wireless LAN Access Point device.
User 's Manual
2400-2483.5 MHz
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457
2462
2467
*1
2472
*1
Wireless LAN
C-3