4-14
Winterization Re-Commission
•
Remove boat cover or shrink-wrap from boat.
•
Remove Duct tape from exhaust flaps.
•
Charge and install battery in boat. Follow all safety precautions associated with
changing batteries.
•
De-winterize engine using engine manufacturer's specifications.
•
Check propeller shaft alignment. Tighten coupling hardware.
•
Check engine compartment for nesting animals. Clean as needed.
•
Reinstall seat cushions from storage.
•
Check entire engine for signs of cracks caused by freeze damage. Check all hose
clamps for tightness. Install bilge drain plugs: transom, T-handle plug and ski
locker drain plug.
•
Reinstall propeller assembly.
•
If not performed during winterization, perform annual maintenance at this time.
•
If boat is equipped with optional fresh-water cooling, and was drained at
winterization, fill at this time.
•
Turn key on and off 2-3 times to allow fuel to return to engine, then start engine.
When engine starts, watch gauges closely, and watch for abnormal readings.
Care and Maintenance