Electrical Connections - Panasonic CQ-VW100W Installation Instructions Manual

Electrical Connections

Caution
¡This unit is designed for use in a car having a 12 V negative ground battery system.
¡Be sure to insulate any exposed wires from the car chassis. Bundle all cables and keep cable terminals free from
any metal parts.
7
¡Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery
may clear the memory.
¡Run the cords avoiding the spots where the temperature can be extremely high.
Audio/Video Input Terminal (AV1 IN)
Audio/Video Input Terminal (AV2 IN)
Connect a VCR, camcorder, other brand's car
navigation system, etc.
PRE OUT FRONT
PRE OUT REAR
EXT VIDEO IN
VIDEO OUT
CAMERA IN
8
CQ-VW100W
(L)(White)
(R)(Red)
(a page 15)
(R)(Red)
Pre-Out Connector (front)
To an external amplifier.
(L)(White)
(R)(Red)
Pre-Out Connector (rear)
To an external amplifier.
(L)(White)
Video Input Terminal (EXT VIDEO IN)
(Yellow)
Connect the video output terminal of Expansion Module (CY-
EM100N, option).
Video Output Terminal (VIDEO OUT)
(Yellow)
Connect the rear monitor. (
Camera Input Terminal (CAMERA IN)
(Yellow)
Connect a rear view camera. (
CQ-VW100W (Rear)
(Yellow)
Fuse (15 A) Refer fuse replacement to your nearest
authorized Panasonic Service Centre. Do not try fuse
replacement by yourself.
a
page 15)
a page 16)