Advertisement
Test the LCD-TV
Prior to sealing the unit, turn on the LCD TV and make sure it is operating properly.
Seal the LCD-TV
When you are sure that the unit is installed and operating correctly, turn the TV off and apply a clear non-
corrosive* silicone sealant to the joint between the edges of the stainless steel bezel and the wall surface material.
Ensure that the silicone is applied into the gap evenly and is applied without any gaps, bubbles, etc. Wipe away
and excess silicone. This seal is of the greatest importance to the reliability and safe operation of the unit and
must be water tight.
*Recommended Silicone Sealants
Loctite: 51388 Superflex
Dow Corning: Any of their neutral-cure flow able silicone adhesives.
THERE'S ONLY ONE™ ELECTRIC MIRROR® | E sales@electricmirror.com | T +1 425 776-4946 | F +1 425-491-8200 | W www.electricmirror.com
5
Advertisement
