Advertisement
6. Connect the wire from the junction box cable (covered with conduit) to the speaker terminal. The live wire
(black) is connected to the positive terminal and the neutral wire (white) is wired to the negative terminal. Screw
the security bracket onto the back of the speaker.
7. Secure the speaker by tightening all screws. The screws will pull the speaker locks-down and secure the speaker
in place.
CONDUIT WITH PLENUM COVER
1-5 follow step the same as in: "Conduit without speaker cover installation.
6. Connect the wire from the junction box cable (covered with conduit) to the speaker terminal. The live wire
(black) is connected to the positive terminal and the neutral wire (white) is wired to the negative terminal. Screw
the plenum cover onto the top of the speaker.
10
THERE'S ONLY ONE™ ELECTRIC MIRROR® | E sales@electricmirror.com | T +1 425 776-4946 | F +1 425-491-8200 | W www.electricmirror.com
Advertisement
