Personal Safety; Noise Information; Use And Care; Service - Bosch GRL 240 HV Operating Instructions Manual

Keep batteries out of reach of children.
Remove the batteries from the tool when not
using for extended periods. When storing for
extended periods, the batteries can corrode and
discharge themselves.

PERSONAL SAFETY

Stay alert, watch what you are doing and use
common sense when operating a measuring
tool. Do not use a measuring tool while you
are tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while using a measuring tool may result in serious
personal injury or incorrect measurement results.
Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
DO NOT use the laser viewing glasses as
safety goggles. The laser viewing glasses are
used for improved visualization of the laser beam,
but they do not protect against laser radiation.
DO NOT use the laser viewing glasses as
sun glasses or in traffic. The laser viewing
glasses do not afford complete UV protection
and reduce color perception.
DO NOT use any optical tools such as, but
not limited to, telescopes or transits to view
the laser beam. Serious eye injury could result.
DO NOT stare directly at the laser beam or
project the laser beam directly into the eyes
of others. Serious eye injury could result.
Use caution when using measuring tools in
the vicinity of electrical hazards.
Wear eye protection. If Spirit Level leaks,
soak up with appropriate absorbent material
and dispose of safely. Spirit Level contains
flammable liquid that may cause respiratory
tract, eye and skin irritation.

NOISE INFORMATION

Do not hold the measuring
!
WARNING
tool close to your ear!
Typically, the A-weighted sound pressure
level of the audio signal at one meter
distance is 75-85 db(A). Measured sound
values determined according to EN60745.
Serious injury can result.

USE AND CARE

Use the correct measuring tool for your
application. The correct measuring tool will do
the job better and safer.
Do not use the measuring tool if the switch
does not turn it on and off. Any measuring
tool that cannot be controlled with the switch is
dangerous and must be repaired.
Store idle measuring tools out of the reach
of children and do not allow persons
unfamiliar with the measuring tool or these
instructions to operate the measuring tool.
Measuring Tools are dangerous in the hands of
untrained users.
Maintain measuring tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the measuring, detection
and layout tools operation. If damaged, have
the measuring tool repaired before use.
Many accidents are caused by poorly maintained
measuring tools.
Use the measuring tool, accessories, etc.,
in accordance with these instructions and
in the manner intended for the particular
type of measuring tool, taking into account
the working conditions and the work to
be performed. Use of the measuring tool for
operations different from those intended could
result in a hazardous situation.

SERVICE

Have your measuring tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the tool is maintained.
Develop a periodic maintenance schedule
for tool. Follow checking and recalibration
procedures outlined in the instruction
manual.
When cleaning a tool be careful not to
disassemble any portion of the tool since
internal wires may be misplaced or pinched
or may be improperly mounted. Certain
cleaning agents such as gasoline, carbon
tetrachloride, ammonia, etc. may damage plastic
parts.
SAVE THESE INSTRUCTIONS.
-8-