Advertisement
Steamer Module Installation
Before Operating
Read the entire Wolf steamer module use & care guide
included with the unit. It contains important safety, opera-
tion, service and warranty information.
Before operating, clean the steamer module thoroughly
with hot water and a mild detergent. Rinse and dry with a
soft cloth. This removes any residual oil and grease left on
the surface from the manufacturing process. Refer to care
recommendations in the use & care guide.
Never operate the steamer module without water;
damage to the unit may result. Water must be added to
the steamer basin before turning the module on.
Module Removal
The steamer module must be disconnected from the
electrical supply before removal.
IMPORTANT NOTE: Removal of the steamer module
should only be performed by Wolf factory certified service.
If removing the steamer module is necessary for cleaning
or service, first disconnect the electrical supply. Remove
the mounting brackets on each side of module and
remove. To reinstall, follow the steps on the previous
page.
wolfappliance.com/specs
9
Advertisement
