Table of Contents
Advertisement
Quick Links
WHEN IN USE THIS PRODUCT CONTAINS HOT LIQUID.
Before each use the user must make a physical inspection to ensure
there is no damage to the metal case of the product.
EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
"WEEE Directive" effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST - DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
CLEANING:
Always remove the plug from the electrical socket
and allow the heater to cool down before cleaning
the heater.
Wipe heater with a soft dry cloth.
Wind the cable around the cable tidy and store the
heater in a clean dry place.
Do not try to repair the heater yourself, always
consult a suitably qualified engineer.
Issue 2014
FOR PRODUCT ADVICE:
• T: 01933 673 144
• F: 01933 678 083
• E: sales@eterna-lighting.co.uk
CLEANING WARNING:
Do not immerse the heater in water.
Do not use any cleaning chemicals such as
detergents and abrasives.
Do not allow the interior to get wet.
SPECIFICATION:
VOLTAGE:
220 – 240V – 50Hz
POWER MAX:
1.5kW
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, but may not be able to give specific
instructions regarding individual installations.
For breakage information visit:
www.eterna-lighting.co.uk
Visit our website:
www.eterna-lighting.co.uk
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
Model:
OH157
1.5kW 7 Fin Oil Filled Heater
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE
Pack contents:
1 x Oil filled heater c/w 13A. fused,
3 pin plug fitted
2 x Heater wheel clamping plates
4 x Castor wheels
4 x Dome nuts
2 x U clamping bolts
4 x U clamp securing wing nuts
Advertisement
Table of Contents
Related Manuals for Eterna OH157
Summary of Contents for Eterna OH157
- Page 1 Always remove the plug from the electrical socket it to the place where you bought it. Our Technical and allow the heater to cool down before cleaning Team will gladly advise on any Eterna Lighting the heater. product, but may not be able to give specific instructions regarding individual installations.
- Page 2 Fig 1 Fig 2 READ THIS FIRST: WARNING: INSTRUCTIONS FOR USE: Check the pack and make sure you have all of the parts Only operate the heater in an upright position with listed on the front of this booklet. If not, contact the the feet attached, any other position could cause supplier where you bought this product.
Need help?
Do you have a question about the OH157 and is the answer not in the manual?
Questions and answers