Before You Begin Cleaning; Cord Storage - Hoover POWER PATH PRO User Manual

Cord storage:

1
Wrap cord around
the cord hooks for
convenient storage.
Attach the plug end to
the cord.

Before you begin cleaning:

Vacuum carpet and
upholstery thoroughly with a
Hoover vacuum before use.
®
Don't use the carpet cleaner
as a dry vacuum cleaner.
Use your Hoover ® carpet
washer only if upholstery
fabric is marked with a "W"
(for "wet" clean) or "S/W" (for
"solvent/dry" or "wet" clean).
Don't clean fabric marked "S"
("solvent/dry" clean only).
Test for colorfastness in a
small, hidden area. Gently
rub surface with a dampened
white cloth. Wait ten minutes
and check for color removal
or bleed with a white
paper towel.
Move furniture out of area to
be cleaned. Place aluminum
foil or wax paper under
legs of furniture too heavy
to move to prevent wood
finishes from staining carpet.
Pin up furniture skirts
and draperies.
Pretreat spots and heavy
traffic areas with a Hoover
®
Cleaning Solution*. See
"Cleaning Solutions" section.
*Available at additional cost if
not included with your model.
NOTE: To prevent staining,
use plastic or aluminum foil
to protect wood or metal
surfaces from possible
water spray.
NOTE: To avoid damage
to wood floors underneath
area rugs or carpet, place
waterproof material (e.g.
plastic) underneath them
before cleaning.
4