Hoover POWER PATH PRO User Manual page 11

For best cleaning results, end with more
dry strokes. (Continue using dry strokes
until little water is visible passing through
the nozzle.)
For best results, Hoover recommends
®
rinsing carpet with water only. This
removes residual carpet cleaning solution.
Fill Clean Water, then turn knob to rinse
mode and repeat. For heavily soiled
areas, repeat. Avoid saturating carpet.
NOTE: Empty Dirty Water Tank when the
motor sound becomes higher pitched and
there is a loss in suction (see "Automatic
shut-off").
NOTE: It is best to alternate wet and dry
strokes as described above.
CAUTION
!
Do not clean over floor electrical outlets. Water
will drip from the brushes and underside of the
product after use and may puddle. To avoid
damage to wood and laminate flooring and
to avoid potential slip hazard, after use (a) do
not leave the product on wood and laminate
surfaces and move to a hard surface and (b)
place unit on an absorbant material
(such as a towel) to soak up drips.
!
8