Advertisement
Quick Start Guide
PSA1U1E - Rugged, In-Line USB to Ethernet Adapter
Driver Installation
The PSA1U1E requires the use of the Portsmith Driver for USB to Ethernet (PSDUE).
This driver can be downloaded at www.Portsmith.com/PSDUE.
Download the PSDUE.CAB file and then copy it to your device using ActiveSync or
removable storage such as MicroSD and SD Cards if your device supports it.
Run PSDUE.CAB
Copyright © Portsmith Technologies 2012 – All Rights Reserved
The PSA1U1E is designed to convert
Ethernet to USB for Mobile
Terminals, Mobile Computers, and
other USB enabled Devices.
This document will provide step by
step instructions for installing and
configuring a PSA1U1E for use with
Windows Mobile and Windows CE
devices.
Install to Device
Click OK to Exit
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Portsmith PSA1U1E
Summary of Contents for Portsmith PSA1U1E
-
Page 1: Quick Start Guide
Windows Mobile and Windows CE devices. Driver Installation The PSA1U1E requires the use of the Portsmith Driver for USB to Ethernet (PSDUE). This driver can be downloaded at www.Portsmith.com/PSDUE. Download the PSDUE.CAB file and then copy it to your device using ActiveSync or removable storage such as MicroSD and SD Cards if your device supports it. -
Page 2: Regulatory Compliance Information
The Ethernet connection is a 10/100 Mbps Ethernet interface that will auto-negotiate link speed and duplexing. Any RJ45 compatible connector will fit the PSA1U1E. The PSA1U1E uses a Type-B receptacle to connect to other USB devices. The target use will require a specific cable and sometimes customized cable. To review what cables are needed for tested configurations, review the PSA1U1E product page at www.Portsmith.com.
Need help?
Do you have a question about the PSA1U1E and is the answer not in the manual?
Questions and answers