Oster 1690 Instruction Manual page 6

Mounting the pedestal:
(model 1690 only)
1. Insert base plugs.
2. Arm the base in cross shape.
3. Fix the pedestal tubes to the base with the screws.
4. Place the decorative plastic cover
5. Insert the chromed tube through the pedestal leaving the upper part outside.
6. Place the plastic ring .
7. Insert the upper fan (control box and motor) to the chromed tube. adjust it with
screws.
Cleaning Instructions:
1. It is recommended to clean your fan periodically. Accumulated dust can affect the
product performance.
2. Before cleaning make sure the fan is disconnected from the outlet
3. For deep cleaning you might take out the blade and meshes. Once the fan is cleaned
make sure to reassemble the fan according to the instructions.
4. Use only a damp cloth. Do not use chemicals products, detergent or alcohol.
5. To dismount the fan proceed backwards as detailed in the mounting instructions
5