Line Key - Aastra 6731i User Manual

The following paragraphs describe how to configure each function listed in the previous table.

Line Key

You can set a programmable key to act as a line/call appearance key on the 6731i. The key acts
as a line that behaves the same as a hard line key (L1 and L2). For more information about the
behavior of line keys, see
You use the Aastra Web UI to set a Line key.
Configuring a Line Key
Aastra Web UI
Use the following procedure to set a Line key on your phone.
1. Click on Operation->Programmable Keys.
2. Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by
your system administrator.)
3. In the "Type" field, select Line to apply to the key.
4. In the "Line" field, select a line for which to apply this key. Valid values are 3 through 6.
5. Click
50
"Multiple Line and Call Appearance Keys"
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY
by your System Administrator.
to save your changes.
on page 47.
Model 6731i IP Phone User Guide