Assembly - Weslo 30551.1 User Manual

Washer (29)–4
Star Washer (81)–4
2 3/4" Bolt (47)–4

ASSEMBLY

Handrail Washer (11)–
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
4" Bolt (120)–2
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on
top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
In addition to the included hex keys , assembly requires a Phillips screwdriver , an
adjustable wrench , and wire cutters .
As you assemble your treadmill, use the drawings below to identify small parts. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The number follow-
ing the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, first check to see if
it has been pre-assembled. To avoid damaging plastic parts, do not use power tools for assembly.
Latch Screw (7)–2
Console Back
Console Screw
Base Pad
Screw (4)–4
(10)–4
Screw (26)–6 Handrail Bolt (8)–4
Incline Leg Bolt (32)–2
Handrail Star
Incline Leg
Upright Washer
Washer (5)–4
Washer (43)–4
(14)–6
Upright Bolt (2)–4
Incline Leg Nut
Upright Star
(46)–2
Washer (9)–2
Wheel Bolt (35)–2
Nut (16)–2
Frame Pivot Bolt (1)–2
6