Table of Contents
Advertisement
Carefully remove this unit and accessories from the box. You should find the unit itself and the following accessories.
Remote control
(CDX-497)
OPEN/CLOSE
1
2
3
4
5
6
7
8
9
0
INDEX
DIMMER
RANDOM
REPEAT
A–B
PROGRAM
CLEAR
SYNCHRO
TAPE
PEAK
SPACE
SEARCH
TIME/INFO
FOLDER
FILE
FILE
ENTER
OUTPUT
LEVEL
FOLDER
NOTES ABOUT THE REMOTE CONTROL
Battery installation
1. Turn the remote control over and remove the battery
compartment cover by sliding it in the direction of the
arrow.
2. Insert the batteries (AAA, R03, UM-4) according to the
polarity markings on the inside of the battery
compartment.
3. Close the battery compartment cover.
%
Press
Battery replacement
If you notice that the remote control must be used closer to
the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
● Use only AAA, R03, UM-4 batteries for replacement.
● Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
● Remove the batteries if the remote control is not used for an
extended period of time.
● If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
UNPACKING
Audio pin cable
(CDX-397)
OPEN/CLOSE
1
2
3
4
5
6
7
8
9
0
INDEX
DIMMER
RANDOM
REPEAT
A–B
PROGRAM
CLEAR
SYNCHRO
TAPE
PEAK
SPACE
SEARCH
Batteries (AAA, R03, UM-4) x 2
TIME/INFO
Remote control operation range
Notes
● There should be no large obstacles between the remote control
● If the remote control sensor is directly illuminated by strong
Remote control
sensor
Within approximately
6 m
and the main unit.
lighting (especially an inverter type fluorescent lamp etc.), the
remote control might not work properly. In this case,
reposition the main unit to avoid direct lighting.
3
En
Advertisement
Table of Contents
