Sharp GX10 User Manual page 87

Setting the Greeting Message (M 7-1-6)
You can set the message which will appear when the
phone is turned on.
1.
Perform steps 1 to 3 in "Changing the Language" on
page 84.
2.
Press or to select "Greeting Message", then
press .
3.
Press or to select "On", then press
4.
Enter the message, then press
Up to 16 characters can be stored as a message.
For details on entering characters, see "Entering
Characters" on page 24.
Tip
• To cancel the Greeting Message setting, select "Off"
in step 3.
Assign Pictures (M 7-1-7)
Pictures/images can be displayed when turning the
power on or off, when receiving an incoming call, or
when operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures/Images
1.
Perform steps 1 to 3 in "Changing the Language" on
page 84.
87 Settings
2.
3.
4.
.
.
5.
Tip
• To cancel the picture/image setting, select "Off" in
To Set My Pictures
1.
2.
Press or to select "Assign Pictures", then
press .
Select the screen to set the picture/image by
pressing or , then press
Select "Animation 1" or "Animation 2" by pressing
or , then press
or
Select "Illustration 1" or "Illustration 2" by pressing
or , then press
in step 3.
The selected picture/image is displayed.
Press .
step 4.
Perform steps 1 to 3 in "To Set Built-in Pictures/
Images".
Press or to select "My Pictures", then press
.
The file name of the pictures/images that are
registered in the Saved Pictures is displayed.
.
.
when you select "Alarm"