Sharp GX10 User Manual page 60

Setting an Algorithm
Set the combination of the operator.
Select from 4 types of combinations in 8 chords, and 2
types in 16 chords.
Algorithm3
Algorithm4
16 Chords
Algorithm1
Algorithm2
(Green number): The modulator (modulating part)
(White number): The carrier (modulated part)
8 Chords
Algorithm6
Algorithm5
Setting the Operator
The meaning and content of the parameter that can be
set to the operator is described below.
Parameter
When the value of the carrier is large, the
Multiple sound becomes high. You can set various
(13 levels) types of notes by changing the values of the
modulator.
Envelope
(Continu- This sets continuous same note or fade-out.
ous/Decay)
This sets a note to be sustained after com-
Sustain
pleting the note. If you want to have a note
(On/Off)
with reverberation, set this function on.
Key Scale
Set the function to "2" if you want to a short
Rate
note.
(2 levels)
Key Scale
This function sets the rate of reducing the
Level
volume as a note becomes higher.
(4 levels)
In the carrier, the volume becomes large as
this level becomes higher.
Total Level In the modulator, the melody becomes
(64 levels) brighter as this level becomes higher. The
melody becomes softer as this level
becomes smaller.
Attack Rate This sets the time from the beginning of the
(15 levels) sound to the maximum volume.
Meaning
Fun & Games 60