Sharp GX10 User Manual page 44

Changing the File Name
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 43.
2.
Select the file name you wish to change by pressing
or , then press
The Options Menu is displayed.
3.
Select "Rename", then press
4.
Enter a new file name.
To delete the last character, press
briefly.
Press and hold [Clear] to clear all characters.
5.
Press .
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (period).
Tip
• When "Data Edit" is displayed in the menu in step 2,
you are able to edit the sound (p. 57). Once you have
completed editing the newly saved file overwrites the
old file. This new file then becomes the original ring
tone.
[Options].
.
[Clear]
Setting the Tone and Strength
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 43.
2.
Select the file name you wish to edit by pressing
or , then press
The Options Menu is displayed.
3.
Press or to select "Tone Set" or "Strength
Set", then press
For full details, see pages 55 to 57.
Note
• If "Tone Set" and "Strength Set" are not displayed
in the menu in step 2, you cannot change the settings.
Sending Messages
1.
Perform steps 1 to 4 in "Playing Back Sounds" on
page 43.
2.
Select the file name you wish to send by pressing
or , then press
The Options Menu is displayed.
3.
Press or to select "Send Message", then
press .
If you select your original ringing tone in step 2;
4.
Press or to select the file format "SMAF",
"MIDI" or "i Melody", then press
[Options].
.
[Options].
.
My Phone 44