Connecting The Telephone; Figure 2-2 Plugging Handset Cord Into Telephone; Figure 2-3 Connecting To Lan - Uniden UIP300 User Manual

Connecting the Telephone

Before using the UIP300, it is necessary to connect the handset to the telephone
and to connect the telephone to the LAN network.
1. Connect the handset to the handset port located on the left side of
the telephone.
Handset Port

Figure 2-2 Plugging Handset Cord into Telephone

2. Connect the Ethernet cable from the LAN to the network port on the UIP300.
The network port is located on the back side of the telephone.
Do not connect the UIP300 to a standard telephone line.
3. If a powered hub is not being used, connect the AC adapter to the power
jack and then connect the adapter to a suitable power outlet.
The AC adapter is not included with the UIP300. Refer to Chapter 1 "Product
Description", "Optional & Replacement Equipment" on page 11 for the part
number for the AC adapter.
Connection to LAN
(Straight Connection)

Figure 2-3 Connecting to LAN

13
AC Adapter
Connection