Panasonic WV-SW559 Installation Manual page 34

c
Secure the camera to the mount bracket with
the camera fixing screw (red, 1 position).
The illustration is an example of using the
mount bracket (accessory).
IMPORTANT:
• Be sure to tighten the camera fixing screw.
Failure to observe this may cause camera trou-
ble due to water leakage or camera falling.
(Recommended tightening torque: 0.78 N·m
{0.58 lbf·ft})
v
Connect the RCA pin cable to the monitor output connector (
for adjustment of the angle field of view).
IMPORTANT:
• The monitor output connector is provided only for checking the adjustment the angle field of
view on the video monitor when installing the camera or when servicing. It is not provided for
recording/ monitoring use.
• Black bands may appear at the top, bottom, right and left of the screen. (There is no problem
with adjustment since the angle field of view is not affected.)
• The video output on the monitor for adjustment does not guarantee the video performance or
image quality.
34
Camera fixing screw (red)
* The camera fixing screw
shall be securely tightened.
page 17) for adjustment (only
☞