Swann Cloud Instruction Manual page 25

6.
Slide this to the ON position
to enable face detection.
7.
Tap this to change settings
for sensitivity, to change the
motion detection area, and to
set the intrusion direction.
8.
Tap this to enable the PIR
sensor on the camera.
9.
Slide this to the ON position
if you are connecting an alarm
to the camera.
Camera Settings
Tap "Camera", tap the name
of your camera, tap the cam-
era settings button.
1.
Tap this to give the camera
a relevant name.
2.
Tap this to check if there
is an update available. When
you start the app, you will be
notified if an update is avail-
able.
3.
Motion detection will be
enabled by default.
4.
Slide this to the ON posi-
tion to enable intrusion de-
tection.
5.
Slide this to the ON posi-
tion to enable camera tam-
per detection.
10.
Slide this to the ON posi-
tion if you would like the app
to alert you if the camera is no
longer being detected.
11.
Tap this to change video
settings for live view. Adjusting
the frame rate and bitrate may
help if you're having problems
when viewing a live stream.
12.
Tap this to adjust bright-
ness, contrast, sharpness and
saturation.
6