Installing The E600 Hardware Driver; Removing The E600 - Huawei E600 User Manual

5 Installation Guide

Installing the E600 Hardware Driver

1 Insert the E600 containing the SIM card into the PCMCIA slot of your
computer.
2 The system will find the new hardware and start the New Hardware
Installation Wizard automatically.
3 If a prompt such as "The software failed to pass the Windows logo test"
appears, click <Continue Anyway> to continue.
4 When the system prompts you that the installation is finished, click <Finish>
to finish the installation of the E600 driver.

Removing the E600

If you want to remove the E600 from the computer, please do it after having
stopped it through the hardware removing function provided by Windows.
When you want to remove the E600 from your computer, follow the procedure
below:
1 Double click on the
computer, a dialog box of "Removed device safely" will appear.
2 Stop the use of the E600 hardware "NEC PCI to USB Open Host Controller".
3 When the system prompts you that it is safe to remove the device, pull out the
E600.
10
HUAWEI
icon on the lower right of the screen of your