Optional Connections; Analog Audio Connections; Subwoofer Out Connection; Inserting Batteries Into The Remote Control - Philips Streamium MC-i200 Getting Started

Preparations

Optional connections

The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.

Analog audio connections

AUX/CDR IN (R/L)
Use a cinch cable to connect these terminals to
the analog audio out terminals of an external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder), for listening to this
source.
LINE OUT (R/L)
Use a cinch cable to connect these terminals to
the analog audio inputs of any analog audio
equipment (amplifier/receiver or tape recorder,
for example), for playback or performing analog
recording.
Notes:
– Do not connect equipment to both the
LINE OUT and AUX/CDR IN terminals at the
same time. Otherwise, noise will be generated and
malfunction might occur.
– If you are connecting equipment with a
monaural output (a single audio out terminal),
connect it to the AUX/CDR IN left terminal.
Alternatively, you can use a "single to double" cinch
cable (the output sound will still remain mono).

Subwoofer out connection

Connect the subwoofer to the SUBWOOFER
OUT terminal. The subwoofer reproduces just
the low bass sound effects (explosions or the
rumble of spaceships, for example).
12
Inserting batteries into the
remote control
Insert two batteries (type R06 or AA) into the
remote control with the correct polarity as
indicated by the "+" and "-" symbols inside
the battery compartment.
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so dispose of them properly.
3139 115 21472