Mounting The Stand Onto The Set; Rear Connections - Philips MCM239/55 Quick Start Manual

Install

Mounting the stand onto the set

1
Locate the bottom of the main unit and find the slot, then slide the stand
in the slot until it stops, as indicated in the figure.

Rear connections

1
Connect the cable of the left speaker to LEFT (red and black) and the cable
of the right speaker to RIGHT (red and black).
2
Extend the wire antenna and fit it to FM ANTENNA.
3
Insert the MW antenna to MW ANTENNA jacks.
4
Connect the AC power cord to the wall socket.
Tip
– To receive optimal radio reception, put the
main unit and the antennas as far away as
possible from the power adaptor.