Specifications; Utp Cable Specifications; General Specifications; Compliance - HP Ethernet 10Gb 2-port 530T Adapter User Manual

Specifications

UTP cable specifications

The HP Ethernet 10Gb 2-port 530T adapter can use existing UTP CAT6 (or better) cable to deliver Gigabit
Ethernet over copper, according to the IEEE 802.3an specifications. For new installations, CAT6a cable is
recommended.
Maximum distances for CAT6 cable are 30 meters (98 feet). Maximum distances for CAT6a are 100 meters
(328 feet).
To connect to the network, the HP Ethernet 10Gb 2-port 530T uses the following cable for 10GBase-T
transmission:
•
CAT6 UTP or better twisted-pair
•
22-26 AWG, 100Ω @ 1 MHz
•
EIA/TIA 568-B.2-10b

General specifications

Specification
Controller
Data rate
PCI bus
Connectors
Dimensions (LxW)

Compliance

Compliance
IEEE
Safety
Value
Broadcom 57810S (Meru) and 10GBaseT PHY (84833)
10 Gb/s per port, 20 Gb/s combined, full-duplex
PCI Express x8 Gen2.1
Two 10GBase-T
16.76 cm x 6.89 cm (6.6 inches x 2.7 inches) without bracket
Standard
IEEE 802.3az (EEE), IEEE802.3, IEEE802.3ap, IEEE802.3xx, IEEE802.2x,
IEEE802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb, 802.1Qbg, 802.1Qbh
UL Mark (US and Canada)
EN 60950
Specifications 11