Suunto M9 Quick Manual page 35

Why does the unit show different wind directions before race start and after start?
During the race start, Suunto M9 displays wind directions as line bias (the wind deviation
from the perpendicular line to the start line) whereas during the race the unit displays the
wind geographic directions.
What if I mark the start line buoys or the turn buoys in the wrong position?
If you mark the position of the buoys again, the unit will overwrite the old position. You
can perform this procedure as many times as required.
Suunto M9 memory is full
The main reason for low memory is the high amount of tracks in the Suunto M9 memory.
The tracks can only be erased by downloading them to the Suunto Sail Manager. You
should always remove tracks from the unit while it is connected to the PC. You can also
regulate the memory capacity by selecting a lower logging interval for the tracking
function.
How can I view MEMPoints?
The Memory Points can only be viewed in the Suunto Sail Manager.
The Suunto Sail Manager cannot connect to Suunto M9
Remove and reinstall the Suunto M9 to the docking station and try to connect again. The
unit displays Interface Timeout after 10 minutes when it is placed in the docking station
and there is no communication between the unit and the PC within the time period.
I cannot display ARCS charts in the Suunto Sail Manager?
The Suunto M9 contains user permits and needs to be connected to the PC when using
ARCS charts.
Where can I find ARCS charts?
The ARCS (Admiralty Raster Chart Service) charts are manufactured by the United Kingdom
Hydrographic Office, UKHO. Check your local dealer for availability of ARCS charts or
visit the UKHO website (www.hydro.gov.uk)
35