Suunto M9 Quick Manual page 26

BEFORE THE RACE START
At start:
1. Press ENTER to start
the race timer.
2. Select Timer Sync.
3. Select the correct
time to start.
At start:
1. Press ENTER to
select the race
course.
2. Select Course.
3. Select the correct
course from the list.
4. Set Navigate to On
in the Navigation
mode. (See pages
22-23.)
At the starting buoys:
1. Press ENTER to store
the location.
2. Select Startline.
3. Select the starboard
and port buoy. (Both
must be defined.)
Check the line bias:
Press START/DATA when the start line
and the wind direction have been set.
The Correct line bias is indicated by P
(port) and S (starboard) and by the angle
of the wind bias.
26
Set the wind direction:
1. Point Suunto M9 towards the wind and press ENTER.
2. Select Wind Dir .
3. Select the correct wind strength and press ENTER.
Check the wind trend:
Press START/DATA when the start line and the
wind direction have been set.
The Correct line bias is indicated by P (port) and
S (starboard) and by the angle of the wind bias.
The unit stores 20 latest wind directions.