Sony Trinitron KV-32HS510 Service Manual page 344

Setting Up the Channel List
Using Auto Setup
38
After you finish connecting your TV, you need to run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn
on your TV for the first time after hooking it up. If you do not want to
set up the channels at this time, you can do it later by selecting the
Auto Program option in the Channel Menu (see page 72).
✍
The Auto Setup feature does not apply for installations that use a cable box
for all channel selection.
1
Press to turn on the TV.
POWER
2
Press on the remote control.
TV FUNCTION
3
To continue running Auto Setup, press
press .
CH-
Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To reset the TV to factory settings
1
Press to turn on the TV.
POWER
2
Hold down on the remote control.
RESET
3
Press on the TV. (The TV will turn itself off, then back
TV POWER
on.)
4
Release .
RESET
. To exit Auto Setup,
CH+