White Balance (Crt) And Sub Bright Adjustment; 2-7.1. Color Offset Adjustment Procedure; H Raster Center Adjustment - Sony Trinitron KV-32HS510 Service Manual

5. Adjust SUB (right) side color according to Service Mode for SCOL.
6. Adjust SUB (right) side color according to Service Mode for SHUE.
2103-2
NO. Name
03 SCOL
04 SHUE
���
COLOR: VB1 < VB4 (=20 ± 40 mV)
HUE: VB2 < VB3 (=20 ± 40 mV)
7. Write data into memory.
2-7. WHITE BALANCE (CRT) AND SUB
BRIGHT ADJUSTMENT
Preparation
• Input an all white 480I (15.734 KHz) signal into the VIDEO 1 input
terminal to perform the White Balance (highlight, cut-off) adjustments.
The parameters to adjust are in the CXA2170P in Service Mode.
Control Function
SUB COLOR
SUB HUE
���
��� ���
2-7.1. COLOR OFFSET ADJUSTMENT
PROCEDURE
Preparation:
• Input an all white (30 IRE) signal to the specified input.
• Adjust the white balance using the specified registers.
����� �
���������
��� ����
�� ����
�� ����
����� �
���������
��� ����
�� ����
�� ����
����� � � ���
���������
��� ����
�� ����
�� ����

2-8. H RASTER CENTER ADJUSTMENT

Preparation:
• Input a monoscope signal.
• Set to NTSC (DRC) mode.
1. Set to Service Mode and adjust as follows:
CXA2150P-2
NO. Name
06 AGNG
CXA2150D-2
NO. Name
02 HSIZ
CXA2150D-3
NO. Name
00 HBLK
2. Reduce HSIZ to see sides of raster.
3. Adjust H-Center with CXA2170D-2.
4. Adjust to the best screen position with H-CENT and write data.
— 19 —
KV-32HS510/34DRC510/34HS510/36HS510/38DRC510
������� ��������
�� ������
�� ������
������� ��������
�� ������
�� ������
������� ��������
���� ����� ����� �� � �
���� ����� ����� �� ��
Control Function Avg. Data
AGING 1, AGING 2
Control Function Avg. Data
Horiz Size
Control Function Avg. Data
Blanking Enable
2
45
0