MAT Industries C151I Owner's Manual page 14

GETTING STARTEd
Extension Cords
Use only a 3­wire extension cord that has a 3­blade grounding plug, and a
3-slot receptacle that will accept the plug on the product. Make sure your
extension cord is in good condition. When using an extension cord, be sure to
use one heavy enough to carry the current your product will draw. Cords must
not exceed 50 feet and No. 12 AWG size must be used. An undersized cord will
cause a drop in line voltage resulting in loss of power and overheating.
Break In Procedures
No break in procedure is required by the user. This product is factory tested to
ensure proper operation and performance.
INSTALLATION
Figure 3
Grounded Outlet
Box
Grounded Outlet
120 VOLTS
Plug
Grounding Pin
14- ENG