Overview - MAT Industries C151I Owner's Manual

Power Switch
This controls the power to the
motor and also the cut-in/
cut-out pressure settings.
This switch serves as the
Auto-On/Off positions for the unit.
Tool Pressure Gauge
Indicates the outgoing air pressure
to the tool and is controlled by the
regulator.
Tank Pressure Gauge
Indicates the reserve air
pressure in the tank.
Regulator
The air pressure coming from the air
tank is controlled by the regulator.
To increase the pressure, turn the knob
clockwise,and to decrease the
pressure, turn the knob counter-
clockwise.
Tank Safety Valve
Used to allow excess tank
pressure to escape into the
atmosphere. This valve should only
open when the tank pressure is
above the maximum rated pressure.
Quick Connect
Offers a quick release feature for
attaching and removing the air hose.
Tank drain Valve
Used to drain condensation from the air
tank. Located at bottom of tank.

OVERVIEw

Air Intake Filter
Provides clean air to the pump and
must always be kept free of debris.
Check on a daily basis or before
each use.
Check Valve
When the pump is not in operation
the valve closes to retain air
pressure inside the tank.
An internal component.
11 - ENG
Outlet
Tube