INSTALLING / CHANGING BATTERIES 3. Replace the cover making sure the 1. Loosen the six (6) screws on the AirLink perimeter seal (O-ring) is in place, then Wireless Vibration Sensing Device cover. securely tighten the six (6) screws. Be sure not to over-tighten screws.
MOUNTING AIRLINK DEVICE TO THE COMPRESSOR 1. Select a mounting location on the 3. Clean the back area of the AirLink Wireless compressor that is easily accessible, will Vibration Sensing Device where the Velcro will be placed with the alcohol pad provided.
AIR COMPRESSOR MONITORING SYSTEM You will be able to view both detailed and summary run times on your APP. The AirLink ADD COMPRESSOR Wireless Vibration Sensing Device must be paired to the application to function properly.
Page 6
PAIRING DEVICE TO MOBILE APPLICATION (Continued) 11:53 11:53 Customer own model AIRLINK™ AIRLINK™ Customer own model Air Compressor Settings Air Compressor Maintenance C151I Settings IH1393075 Unit Nickname: Ex: "Garage IH1393075.GNE Warehouse Serial Number: Ex: "1234567890 IH1393075.HT IH7519975 Manual #: Ex: "200-3165 IH7519975.HT...
Page 7
PAIRING DEVICE TO MOBILE APPLICATION (Continued) 2. Choose the maintenance activities 11:53 appropriate for your air compressor and AIRLINK™ define the maintenance parameters. Pump Oil Change Interval in Months: Ex: "6 3. Enter information for your compressor Pump Filter Check Interval Hrs: Ex: "50...
Page 8
Fastener Torque Interval in Months: Ex: "12 11:53 AIRLINK™ Ex: "3.7 Electric Motor Horespower: Discovering AirLink 62:BB -- 36 BC:33:AC:BD:62:BB Compressor Run Hours: Pump Oil Change Interval in Months: Ex: "6 Average Kwh Cost $: Ex:"$0.12 Ex: "50 Pump Filter Check Interval Hrs:...
“Bluetooth” setting on your phone, it must be connected through the • Make sure you press “PAIR DEVICE” on AirLink application only. phone within 30 seconds after the device flashes red & blue. • If your app and device stop interacting check for updates on your IOS or Android •...
Page 10
AIR COMPRESSOR MAINTENANCE SETTINGS Unit Nickname – this will show up on the Air If you selected an Industrial Air branded compressor, then the following are Compressor Maintenance Dashboard. automatically populated and shown here for Serial Number (optional) - recommended for informational purposes only: future ease of ordering parts and obtaining Power Type –...
AIR COMPRESSOR MAINTENANCE SETTINGS (Continued) Electric Motor Horsepower – Used for cost Gas Engine Spark Plug Hours - Number of estimate. hours you want the compressor to run before checking / changing the spark plug. See your Gas Engine Oil Chg Interval in Hrs - Number manual.
COMPRESSOR MANAGER (Continued) Select a compressor to edit or delete. WARNING: Deleting a compressor is 11:53 permanent the data cannot be recovered. AIRLINK™ 11:53 AIRLINK™ Pump Oil Change Interval in Months: Ex: "6 Air Compressor Settings Pump Filter Check Interval Hrs: Ex: "50...
DASHBOARD Note: The name of the compressor will change from plain text to BOLD to indicate which compressor you are accessing. 11:53 Air Compressor Maintenance Dashboard Refresh Total compressor Shop (IV5038055) - 0 HRS run time UPDATED: NEVER Preform maintenance Pump Oil: 1/6/2022 6:00 pm 200 Hours left Hours left until...
The AIRLINK Wireless Vibration Sensing Device will record when the air compressor runs and for how long. The data is retrieved with the AIRLINK mobile application. To retrieve the data from your air compressor, follow these steps: 1. Make sure you are within 30 feet of the device with the app.
The Compressor Maintenance Log provides a Maintenance History for the compressor linked to your app. When maintenance is performed and the interval is RESET, the log is updated with an entry. The maintenance history log can be manually updated with notes. The Compressor Run Time Log provides a record of when the compressor ran and for how long.
Page 16
LOG (Continued) 11:53 11:53 Air Compressor Maintenance Air Compressor Maintenance Dashboard Dashboard Shop (IV5038055) - 0 HRS Electric (IPA1882054) - 334 HRS UPDATED: NEVER UPDATED: 1/18/2021 9:16 Pump Oil: 1/6/2022 6:00 pm 200 Hours left Pump Oil: 1/6/2022 6:00 pm 77 Hours left Pump Filter: 2/10/2021 6:00 pm 20 Hours left...
NOTE: If more than one phone is paired to a device, only the phone that reset the interval will show the reset. The second phone must also be reset to show the maintenance history. 11:53 11:53 11:53 11:53 AIRLINK™ AIRLINK™ Air Compressor Maintenance Compressor Maintenance Reset Compressor Maintenance Reset Air Compressor Maintenance “2570-1 Model: ILA1883054.01”...
Page 18
Tue, Jan 19 phone. Air Compressor Maintenance This may Settings vary by COMPRESSOR MANAGER Unit Nickname: Ex: "Garage AIRLINK phone. AIRLINK DASHBOARD This is a reminder to check/tension the pump belt on air compressor Serial Number: Ex: "1234567890 Press to open Manual #: Ex: "200-3165...
Ex: "Garage DASHBOARD FREQUENTLY ASKED QUESTIONS (FAQ) Serial Number: Ex: "123456789 The AIRLINK application links to the Industrial Air Knowledge Center. Each info button either gives you a hint of what to do or links you Manual #: Ex: "200-3165 to the appropriate FAQ, for example, how to check and change your pump oil.
Page 22
Services"). This policy covers our Products and Services, includ- By using or visiting the Website, you expressly agree to be ing the MAT Industries LLC website (Industrial Air), as well as any bound by these Terms of Use and all applicable laws and regula- interactions you may have while viewing content provided tions governing the Website.
Page 23
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 24
IC Warning This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.