Audible Signal; How To Run A Wash Cycle; Loading Washing - AEG Electrolux LAVAMAT BELLA 1481 User Manual

6

How to run a wash cycle

To activate the child safety device, you must :
1. Switch the appliance on.
2. Press the FLECKEN / TACHE and SENSITIV /
SENSIBLE buttons at the same time until con-
firmation with the
window.
The appliance memorises the selection of this op-
tion.
To deactivate child safety, repeat the process.

Audible signal

The end of the programme and operating anomalies are indicated by acoustic beeps. If you
want to remove these acoustic signals, please do the following :
1. Switch the appliance on.
2. Press the U/MIN / T/MIN and FLECKEN / TACHE
buttons until confirmation with an acoustic
beep.
3. The acoustic signal is removed.
The signal is only active if alarm sounds.
If you want to reactivate the acoustic signal,
please follow the same procedure.
How to run a wash cycle
Before you wash laundry in your washing machine for the first time, we recommend you
run a preliminary wash at 95°C, with no laundry but with detergent. This will clean the tub.

Loading washing

• Open the lid of the appliance.
• Open the drum by depressing the locking
button A : The two shutters unlock auto-
matically.
• Load the washing, close the drum and the lid
of your washing machine.
Important : Before closing the lid of your ap-
pliance, ensure that the drum is properly
closed :
• When the two shutters are closed,
• Locking button A released.
symbol in the display
A