Esd Protection - Nokia 2228 BAR RM-377 Service Manual

4. ESD PROTECTION

6
Nokia requires that service points have sufficient ESD protection
(against static electricity) when servicing the phone.
Any product of which the covers are removed must be handled with ESD
protection. The SIM card can be replaced without ESD protection if the
product is otherwise ready for use.
To replace the covers ESD protection must be applied.
All electronic parts of the product are susceptible to ESD. Resistors, too,
can be damaged by static electricity discharge.
All ESD sensitive parts must be packed in metallized protective bags
during shipping and handling outside any ESD Protected Area (EPA).
Every repair action involving opening the product or handling the
product components must be done under ESD protection.
ESD protected spare part packages MUST NOT be opened/closed out of
an ESD Protected Area.
For more information and local requirements about ESD protection and
ESD Protected Area, contact your local Nokia After Market Services
representative.
Confidential
Copyright @ 2008 NOKIA. All rights reserved
2228 bar RM-377
Service Manual Level 1&2
Version 1.0