Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nokia LUNA BH-220
Summary of Contents for Nokia LUNA BH-220
- Page 1 Nokia Luna with Wireless Charging (BH-220) User Guide Issue 1.0...
- Page 2 Introduction About your headset With the Nokia Luna Bluetooth Headset, you can handle calls hands-free, even when you are using two phones at the same time. Remove the headset from the cradle, and it's instantly ready for use. The surface of this product is nickel-free.
-
Page 3: Get Started
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following profiles: Headset Profile 1.1 and Hands-Free Profile 1.5 . Check with the manufacturers of other devices to determine their compatibility with this device. About Qi Qi is a global standard that makes wireless charging possible for your device. With a Qi-compatible device, you don't need to connect any cables. - Page 4 Before using the headset, you must charge the battery. Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Use of unapproved chargers may present a risk of fire, explosion, or other hazard.
-
Page 5: Pair The Device
Switch the headset on or off Switch on Press the headset down to remove it from the cradle. The headset switches on, and a green indicator light flashes once. The headset connects to the last connected phone. If you have never paired the headset with a phone, or you have cleared the pairings, pairing mode is activated. - Page 6 Pair and connect the headset using NFC With Near Field Communication (NFC), you can pair and connect your headset to your compatible phone easily. If the compatible phone supports NFC, activate its NFC feature, remove the headset from the cradle, and touch the NFC area of the cradle with the NFC area of your phone. The headset connects to the phone automatically.
-
Page 7: Make Calls
Make sure Bluetooth is activated on both phones. To switch the headset off, press and hold the multifunction key for 5 seconds. Press and hold the multifunction key for 5 seconds to activate pairing mode, and pair the headset with the second phone. Switch the headset off and back on. - Page 8 End an ongoing call, and answer a call on another phone Press the multifunction key. Put an ongoing call on hold, and answer a call on another phone Press and hold the multifunction key for 2 seconds. Switch between active and held calls Press and hold the multifunction key for 2 seconds.
-
Page 9: Product And Safety Information
Press and hold the multifunction key for 9 seconds. The headset beeps twice, and the red and green indicator lights alternate. When the headset switches on, pairing mode is activated. Follow the voice prompts. Product and safety information Battery and charger information This device has an internal, nonremovable, rechargeable battery. -
Page 10: Copyright And Other Notices
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Nokia is under license. - Page 11 /Issue 1.0 EN-US...