Page 1
ALWAYS • Visually inspect Patio Light prior to each use. Ask a qualified service person to inspect hose assembly annually for evidence of abrasion, wear or cuts. Replace hose assembly if any of these conditions are present.
Page 2
3/8 inch male flare fitting located clockwise to be in an off position. Open source/cylinder valve on the Patio Light head (A). Tighten the connection with a slowly, open head valve slightly and light with a long grill or wrench (no need for tape or pipe compound).
Page 3
5. Connect fuel supply hose (D) to Patio Light head (E). No fireplace lighter. Adjust to desired flame using head valve. DO pipe compound is necessary on this connection as this is a NOT LEAVE UNATTENDED.
Page 4
• DO NOT move, handle or service Patio Light while it is in operation or hot. • DO NOT allow children to play on or around the Patio Light. It could cause a fire or bodily burns. Place in a low traffic area.