Summit Radio - DAP Technologies M1000 User Manual

6.1 Summit Client Utility
To launch, go to:
Start > Programs > WLAN Manager
1. The window opens.
WLAN Manager
2. Tap or in answer to
Yes No

6.0 Summit Radio

Disable Wireless LAN?
6.0 Summit Radio Utility
3. The
Summit Client Utility
6.1.1 Main Window
The Main window provides an overview of the current wireless network
connection configuration (Active Profile), a snapshot of connection in-
formation, and additional information regarding SCU (About SCU).
The Main window displays the following properties and options:
1.
Disable [Enable] Radio
lect to disable it; when the radio is disabled, select
Disable Radio
to enable it.
Enable Radio
2. - Displays the name of the active. Use the drop-
Active Profile
down menu to select a different profile.
If
Note: ThirdPartyConfig
through a power cycle), WZC (Windows Zero Configuration)
or another application is used to configure the SSID, Auth Type,
EAP Type, and Encryption settings.
3. - Indicates the current status of the Summit radio. Potential
Status
values include:
• - The radio is not recognized by Summit software, pos-
Down
sibly because the radio is not installed properly.
• - The radio has been disabled because Disable Radio
Disabled
was tapped in the SCU Main window. To enable the radio, tap
Enable Radio on the SCU Main window.
• - The radio is not associated to an AP, pos-
Not Associated
sibly because no AP for the active profile is in range.
97
window appears.
button - When the radio is enabled, se-
is selected (and after the device goes