DAP Technologies M1000 User Manual page 33

In order for this feature to find Bluetooth devices, the user must
NOTE:
have Bluetooth devices activated.
6. Once Bluetooth devices are found, a list will appear in the
window.
tooth Manager
If no Bluetooth device is found, the Bluetooth Manager window
NOTE:
returns to a blank state.
7. Double-tap the desired device in the
(or single-tap the device and tap
8. The
Bluetooth Manager
9. Tap to begin authentication or tap
Trusted
device from the scanned list.
Bluetooth Manager
).
OK
Authentication window appears.
to remove the
Delete
3.0 Control Panel Settings
10. Tap to connect to the device without authentication or tap
No
to authenticate the device before connecting.
Blue-
11. If is tapped, the
Yes
12. Enter a PIN (between 1 and 16 characters) in the
and tap .
OK
window
13. The PIN request is sent to the device for bonding.
14. When prompted, the same PIN must be entered on the other device.
15. When the PIN is entered correctly on the other device, the bonded
icon appears on the device list.
If the device to which the mobile computer is bonding does not
Note:
appear in the list, ensure it is turned on, in discoverable mode,
and within range (30 feet / 10 meters) of the mobile computer.
33
windows appears.
Blutooth Enter PIN
Enter PIN
Yes
text box