Before you Begin The cleaner must be operated in accordance with these instructions and used only for domestic household Precautionary measures: cleaning to remove DRY dirt and dust from household carpets, flooring and fabrics. This cleaner is not fit to be used as an industrial cleaner, and is not designed for the collection of vitreous building material including Do not operate the vacuum cleaner too close to heaters, radiators, and other particle board, construction products and similar products such as wood/fibres, cement, fillers, fibre glass...
Do not use the appliance without dust bag and/or filter in place. If the power cable is damaged, return to a Hoover service agent or contact Hoover Customer Care in order to avoid a hazard. Do not extend the power cable beyond the blue mark.
Page 5
Instructions for Use Always remove the plug from the power socket before fitting or removing accessories! Assembly Use of 2 in 1 Accessory 1. Fix the handle on the base body, and ensure This cleaner comes with a pins have clicked into place. 2 in 1 accessory: 2.
Maintenance Changing of the filter and emptying the dust canister Motor Filter Cleaning The filter should be cleaned at least twice a year or when required. Warning: Ensure the cleaner is not connected to the power supply when performing any maintenance procedures. Disconnect from mains power supply before performing maintenance duties.
Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a two cleaner is at the sole discretion of Hoover Floorcare. If Hoover Floorcare year parts and labour warranty against product defects decide to repair or replace the cleaner, it will do so at its own cost.