Installation Examples - Nuvo h2o Installation Manual

Installation Examples

Whole-House System
This customer installed the nuvoH2O
system in their garage where the water
main line entered the house from the
street.
Remember the nuvoH2O system does
not require electricity.
Whole-House System
Although the nuvoH2O system has a
built-in shut-off and by-pass valve, this
customer had an existing by-pass loop
from a previously installed salt-based
system. He easily attached the nuvoH2O
system to the by pass loop.
Manor System
This customer replaced his old salt water
softener with the nuvoH2O system using
copper pipe. Because of spacing issues
between studs he used a 2 x 4 to insure
stability. With the Manor System you
could install this system without using the
wall mount provided. Simply use the
L-Bracket provided and attach securely
to your studs.
7