Remote Control Operating Instructions; Installation Of Venting Kit - Cool-Living CL-PAC121 Operating Instructions Manual

REMOTE CONTROL OPERATING INSTRUCTIONS

REMOTE CONTROL OPERATING INSTRUCTIONS
SIGNAL TRANSMITTER
REMOTE CONTROL
ON/OFF
ON/OFF BUTTON
Press the ON/OFF (POWER) button once to manually
Press the ON/OFF (POWER) button once to manually
turn the unit on. Press the Power button once more to
turn the unit on. Press the Power button once more to
turn the unit off.
turn the unit off.
MODE
MODE BUTTON
Press the MODE Button repeatedly to cycle between
Press the MODE Button repeatedly to cycle between the
the different modes.
different modes.
AUTO
COOL
DRY
FAN
NOTE: Heat Mode is only
HEAT
available on CL-PAC-122
10
- / +
- / + BUTTONS
When the unit is in Air Conditioner or Heater (CL-
When the unit is in Air Conditioner or Heater (CL-PAC-
PAC-122) mode you can select your desired tempera- 122) mode you can select your desired temperature.
ture. Press the TEMP SELECT buttons (+ or -) to se- Press the TEMP SELECT buttons (+ or -) to select
your desired temperature setting. The temperature on the
lect your desired temperature setting. The temperature
LCD display on the remote control will increase or de-
on the LCD display on the remote control will increase
crease accordingly. Hold the +/- buttons for two seconds
or decrease accordingly. Hold the +/- buttons for two
to rapidly increase or decrease the temperature. Temp.
seconds to rapidly increase or decrease the tempera-
range is 61°F—86°F.
ture. Temp. range is 61°F—86°F.
FAN
FAN BUTTON
Press the Fan Speed button to change fan speeds.
Fan Speeds:
Low Speed Medium Speed
High Speed
NOTE: When the unit is in Dehumidifier (DRY) NOTE: When the unit is in Dehumidifier (DRY) mode,
the fan speed is not adjustable.
mode, the fan speed is not adjustable.
TEMP BUTTON
Press the Up and Down Swing Button to turn on and off
the vertical swing mode. In vertical swing mode, the lou-
vers will rotate up and down to circulate more air.
When the unit is off, press the Up and Down Swing
When the unit is off, press the Up and Down Swing But-
Button and "+" at the same time to enable stationary
ton and "+" at the same time to enable stationary swing
swing mode. Stationary Swing mode allows for more
mode. Stationary Swing mode allows for more control
control over the way the louvers swing up and down.
over the way the louvers swing up and down. The Swing
The Swing icon on the Remote LCD will blink twice
icon on the Remote LCD will blink twice when this is
when this is
Blinks for 2 Seconds
In Stationary Swing mode, press the Up and Down
In Stationary Swing mode, press the Up and Down
Swing Button to change the swing pattern per below: Swing Button to change the swing pattern per below:
Disable Stationary Swing Mode by pressing the Up Disable Stationary Swing Mode by pressing the Up and
Down Swing Button and "+" button at the same time.
and Down Swing Button and "+" button at the same
The Swing Icon on the Remote LCD will blink twice
time. The Swing Icon on the Remote LCD will blink
when this is disabled.
twice when this is disabled.
10
7
CL-PAC-121_122