The FAN-PWM has 3 default programs for use with the SPAL temperature sen-
sor (FAN-PWM-TS).
Preset 1 has a LOW temp of 170° and a HIGH temp of 185°.
Preset 2 has a LOW temp of 190° and a HIGH temp of 205°.
Preset 3 has a LOW temp of 205° and a HIGH temp of 220°.
1. Hold down PRG button for 5 seconds.
2. FAN will stop running and 'FAN' LED will be slowly blinking AMBER.
3. Press PRG button 2 times.
4. 'FAN' LED will slowly blink GREEN.
5. Press ENTR button once for Preset 1. 'STAT' LED will flash once.
Press ENTR button again for Preset 2. 'STAT' LED will flash twice.
Press ENTR button again for Preset 3. 'STAT' LED will flash three times.
6. Once desired preset has been reached Press PRG button to exit
programming mode.
Selecting The Desired Preset
www.spalusa.com
Programming
(continued)
14